Ma'aunin Nutsewar Ultrasonic akan Layi T6580
Ana iya amfani da firikwensin Ultrasound Sludge Interface don ci gaba da tantance matakin ruwa daidai. Bayanan da suka dace, ingantaccen aiki; aikin gano kai da aka gina a ciki don tabbatar da daidaiton bayanai; shigarwa da daidaitawa mai sauƙi.
Mita Mai Haɗa Ruwa ta Ultrasound ta Intanet kayan aiki ne na nazari na kan layi wanda aka tsara don auna Haɗin Ruwa na Ruwa daga ayyukan ruwa, hanyar sadarwa ta bututun birni, sa ido kan ingancin ruwa a tsarin masana'antu, ruwan sanyaya da ke zagayawa, fitar da iskar carbon, fitar da ruwa daga membrane, da sauransu, musamman a fannin kula da najasa na birni ko ruwan sharar masana'antu. Ko dai ana tantance ɓarnar da aka kunna da kuma dukkan tsarin maganin halittu, ana nazarin ruwan sharar da aka fitar bayan an yi maganin tsarkakewa, ko kuma ana gano yawan ɓarnar a matakai daban-daban, na'urar auna Sludge na iya ba da sakamakon aunawa akai-akai da kuma daidai.
85~265VAC±10%,50±1Hz, amfani da wutar lantarki ≤3W;
9~36VDC, amfani da wutar lantarki:≤3W;
Haɗin Lalacewa: 0~5m, 0~10m
Ma'aunin Nutsewar Ultrasonic akan Layi T6580
Yanayin aunawa
Yanayin daidaitawa
Jadawalin Sauyi
Yanayin Saiti
1. Babban nuni, sadarwa ta 485 ta yau da kullun, tare da ƙararrawa ta kan layi da ta offline, girman mita 235 * 185 * 120mm, babban allon nuni mai inci 7.0.
2. An shigar da aikin rikodin lanƙwasa bayanai, injin yana maye gurbin karatun mita na hannu, kuma an ƙayyade kewayon tambaya ba tare da wani sharaɗi ba, don haka bayanan ba za su sake ɓacewa ba.
3. Rikodin Sludge Interface na kan layi na ainihin lokaci, bayanan zafin jiki da lanƙwasa, sun dace da duk mita masu ingancin ruwa na kamfaninmu.
4.0-5m, 0-10m, akwai nau'ikan ma'auni iri-iri, sun dace da yanayin aiki daban-daban, daidaiton ma'auni bai wuce ±5% na ƙimar da aka auna ba.
5. Sabuwar hanyar shakewa ta allon wutar lantarki na iya rage tasirin tsangwama ta hanyar lantarki yadda ya kamata, kuma bayanan sun fi karko.
6. Tsarin injin gaba ɗaya yana da ruwa kuma yana hana ƙura, kuma an ƙara murfin baya na tashar haɗin don tsawaita rayuwar sabis a cikin mawuyacin yanayi.
7. Shigar da bangarori/bango/bututu, akwai zaɓuɓɓuka guda uku don biyan buƙatun shigarwa na masana'antu daban-daban.
Haɗin lantarki Haɗin da ke tsakanin kayan aiki da firikwensin: samar da wutar lantarki, siginar fitarwa, hulɗar ƙararrawa ta relay da haɗin da ke tsakanin firikwensin da kayan aiki duk suna cikin kayan aikin. Tsawon wayar jagora don na'urar lantarki mai tsayayye yawanci mita 5-10 ne, kuma lakabin ko launi da ya dace akan firikwensin Saka wayar a cikin tashar da ta dace a cikin kayan aikin kuma ƙara ta.
| Kewayon aunawa | 0~5m, 0~10m (Zaɓi ne) |
| Na'urar aunawa | m |
| ƙuduri | 0.01m |
| Kuskuren asali | ±1%FS |
| Zafin jiki | 0~50 |
| Yankewar Zafin Jiki | 0.1 |
| Zafin Jiki Kuskuren asali | ±0.3 |
| Fitowar yanzu | Biyu 4 ~ 20mA, 20 ~ 4mA, 0 ~ 20mA |
| Fitar da sigina | RS485 MODBUS RTU |
| Sauran ayyuka | Rikodin bayanai & Nunin Lanƙwasa |
| Lambobin sadarwa guda uku na sarrafa jigilar kaya | 5A 250VAC,5A 30VDC |
| Tsarin samar da wutar lantarki na zaɓi | 85~265VAC,9~36VDC, amfani da wutar lantarki≤3W |
| Yanayin aiki | Babu wani tsangwama mai ƙarfi a kusa da filin maganadisu sai dai filin geomagnetic.˫ |
| Zafin aiki | -10~60 |
| Danshin da ya dace | ≤90% |
| Matsayin hana ruwa shiga | IP65 |
| Nauyi | 1.5kg |
| Girma | 235 × 185 × 120mm |
| Hanyoyin shigarwa | An saka bango |
Na'urar firikwensin mai duba sludge ta Ultrasonic CS6080D
| Lambar Samfura. | CS6080D |
| Fitar da Wuta/Sigina | 9~36VDC/RS485 MODBUS RTU |
| Hanyoyin aunawa | Ultrasonic raƙuman ruwa |
| Kayan gidaje | 304/PTFE |
| Mai hana ruwa matsayi | IP68 |
| Kewayon aunawa | 0-5/0-10m (Zaɓi ne) |
| Auna yankin makafi | −20 cm |
| Daidaito | <0.3% |
| Matsakaicin zafin jiki | 0-80℃ |
| Tsawon kebul | Kebul na mita 10 na yau da kullun |
| Aikace-aikace | Najasa, ruwan masana'antu, kogi |
Lokacin zabar wurin shigar da firikwensin, ya kamata a bi waɗannan sharuɗɗan:
● A ajiye na'urar firikwensin a tsaye a saman laka da kuma ƙasan wurin wanka.
●Bai kamata a sami wani cikas a cikin kewayon watsawa kai tsaye a ƙarƙashin na'urar binciken ba don guje wa toshewar siginar ultrasonic da kuma nuna cikas ta hanyar cikas.
●Ya kamata a sanya na'urar binciken nesa da kumfa mai iskar gas da kuma abubuwan da ke iyo da ke aiki sakamakon kwararar iska kwatsam don tabbatar da daidaito da daidaito.
●Ya kamata a sanya na'urar bincike nesa da hanyar shiga da kuma hanyar fita.
●Ya kamata a nutsar da na'urar firikwensin gaba ɗaya cikin ruwa. Idan bangon yana tsaye sama da ƙasa kuma saman yana da faɗi, a ƙayyade nisan da ke tsakanin bangon bisa ga teburin da ke ƙasa.
●Idan bangon wurin wanka bai daidaita ba, ko kuma akwai tallafi, bututu da sauran abubuwa, ya zama dole a ƙara nisan da ke tsakanin bangon wurin wanka, domin guje wa tsangwama da abubuwan da ke sama ke haifarwa ga aunawa.
