Kan layi Ultrasonic Sludge Interface Mita T6080
Ana iya amfani da firikwensin Interface na Ultrasound Sludge don ci gaba da tantance matakin Liquid daidai.Bayanan tsayayye, aiki mai dogara;ginanniyar aikin tantance kai don tabbatar da ingantaccen bayanai;sauki shigarwa da calibration.
A online duban dan tayi sludge Interface Mita ne online analytical kayan aiki tsara don auna Sludge Interface na ruwa daga waterworks, birni bututu cibiyar sadarwa, masana'antu tsari ruwa ingancin saka idanu, zagawa ruwa sanyaya, kunna carbon tace effluent, membrane tacewa effluent, da dai sauransu musamman a cikin jiyya na najasa na birni ko datti na masana'antu.Ko ana kimanta sludge mai kunnawa da duk tsarin jiyya na halitta, nazarin ruwan datti da aka fitar bayan jiyya na tsarkakewa, ko gano yawan sludge a matakai daban-daban, Mitar Interface na Sludge na iya ba da sakamako mai ci gaba da daidaito.
85 ~ 265VAC ± 10%, 50± 1Hz, ikon amfani ≤3W;
9 ~ 36VDC, amfani da wutar lantarki: ≤3W;
Matsayin Liquid: 0 ~ 5m, 0 ~ 10m, 0 ~ 20m
Kan layi Ultrasonic Sludge Interface Mita T6080
Yanayin aunawa
Yanayin daidaitawa
Taswirar Trend
Yanayin saiti
1.Babban nuni, daidaitaccen sadarwa na 485, tare da ƙararrawa kan layi da layi, 144 * 144 * 118mm girman mita, 138 * 138 girman rami, 4.3 inch babban nunin allo.
2.An shigar da aikin rikodi na lankwasa bayanai, injin ya maye gurbin karatun mita na hannu, kuma an ƙayyade kewayon tambaya ba da gangan ba, don kada bayanan ya ɓace.
3.Real-lokaci rikodin rikodi na kan layi na Sludge Interface, bayanan zafin jiki da masu lankwasa, masu dacewa da duk matakan ruwa na kamfaninmu.
4.0-5m, 0-10m, nau'ikan ma'auni iri-iri suna samuwa, dacewa da yanayin aiki daban-daban, daidaiton ma'auni ya kasance ƙasa da ± 5% na ƙimar da aka auna.
5.The sabon shaƙe inductance na ikon hukumar iya yadda ya kamata rage tasiri electromagnetic tsangwama, da kuma bayanai ne mafi barga.
6.Tsarin tsarin na'ura duka yana da ruwa da ƙura, kuma an ƙara murfin baya na tashar haɗin gwiwa don tsawaita rayuwar sabis a cikin yanayi mara kyau.
7.Panel / bango / shigarwa na bututu, zaɓuɓɓuka uku suna samuwa don saduwa da bukatun shigarwa na masana'antu daban-daban.
Haɗin wutar lantarki Haɗin da ke tsakanin kayan aiki da firikwensin: samar da wutar lantarki, siginar fitarwa, lambar ƙararrawa relay da haɗi tsakanin firikwensin da na'urar duk suna cikin na'urar.Tsawon wayar gubar don kafaffen lantarki yawanci mita 5-10 ne, kuma lakabin da ya dace ko launi akan firikwensin Saka wayar a cikin madaidaicin tasha a cikin kayan aikin kuma ƙara ta.
| Kewayon aunawa | 0 ~ 5m, 0 ~ 10m (Na zaɓi) |
| Ƙungiyar aunawa | m |
| Ƙaddamarwa | 0.01m |
| Kuskuren asali | ± 1% FS |
| Zazzabi | 0 ~ 50 |
| Ƙimar Zazzabi | 0.1 |
| Kuskuren asali na zafin jiki | ± 0.3 |
| Abubuwan da aka fitar na yanzu | Biyu 4 ~ 20mA, 20 ~ 4mA, 0 ~ 20mA |
| Fitowar sigina | RS485 MODBUS RTU |
| Sauran ayyuka | Rikodin bayanai & nunin lanƙwasa |
| Lambobin sarrafawa na relay guda uku | 5A 250VAC, 5A 30VDC |
| Wutar wutar lantarki na zaɓi | 85 ~ 265VAC, 9 ~ 36VDC, amfani da wutar lantarki≤3W |
| Yanayin aiki | Babu wani tsangwama mai ƙarfi a kusa da filin maganadisu sai filin geomagnetic. |
| Yanayin aiki | -10-60 |
| Dangi zafi | ≤90% |
| Ƙididdiga mai hana ruwa | IP65 |
| Nauyi | 0.8kg |
| Girma | 144×144×118mm |
| Girman buɗewa shigarwa | 138×138mm |
| Hanyoyin shigarwa | Panel & bango mounted ko bututu |
CS6080D Ultrasonic sludge interface firikwensin
| Samfurin NO. | Saukewa: CS6080D |
| Fitar Wuta/Sigina | 9 ~ 36VDC/RS485 MODBUS RTU |
| Hanyoyin auna | Ultrasonic kalaman |
| Kayan gida | 304/PTFE |
| Mai hana ruwa daraja | IP68 |
| Kewayon aunawa | 0-5/0-10m (Na zaɓi) |
| Auna yankin makafi | cm 20 |
| Daidaito | 0.3% |
| Yanayin zafin jiki | 0-80 ℃ |
| Tsawon igiya | Standard 10m na USB |
| Aikace-aikace | Najasa, ruwan masana'antu, kogi |
Lokacin zabar wurin shigarwa na firikwensin, ya kamata a bi ka'idodi masu zuwa:
●Kiyaye firikwensin daidai da saman laka da kasan tafkin.
●Kada a sami wani cikas a cikin kewayon watsawa kai tsaye a ƙasa da bincike don guje wa katange siginar ultrasonic da kuma nuna cikas.
●Ya kamata a shigar da binciken daga kumfa gas da daskararru masu iyo mai aiki wanda ke haifar da saurin kwarara don tabbatar da daidaiton ma'auni.
●Ya kamata a shigar da binciken nesa da mashigai da mashigai.
●Ya kamata a nutsar da binciken firikwensin cikin ruwa gaba ɗaya.Idan bango yana tsaye sama da ƙasa kuma saman yana lebur, ƙayyade nisa daga bangon bisa teburin da ke ƙasa.
●Idan bangon tafkin bai dace ba, ko kuma akwai goyon baya, bututu da sauran abubuwa, ya zama dole a kara nisa daga bangon tafkin, don kauce wa tsangwama da abubuwan da ke sama suka haifar da ma'auni.
