Mitar Turbidity Kan layi T6570
Ka'idar turbidity / sludge maida hankali firikwensin dogara ne a kan hade infrared absorption da watsawa haske hanya. Ana iya amfani da hanyar ISO7027 don ci gaba da ƙayyadaddun ƙayyadaddun turbidity ko sludge taro. Dangane da ISO7027 fasahar haske mai watsawa infrared sau biyu ba ta shafar chromaticity don tantance ƙimar tattara sludge. Ana iya zaɓar aikin tsaftace kai bisa ga yanayin amfani.
Bayanan tsayayye, aiki mai dogara; ginanniyar aikin tantance kai don tabbatar da ingantaccen bayanai; sauki shigarwa da
Yawan Amfani
Mitar turbidity na kan layi kayan aikin bincike ne na kan layi wanda aka ƙera don auna turbidity na ruwa daga ayyukan ruwa, cibiyar sadarwar bututun birni, sa ido kan ingancin ruwa na tsarin masana'antu, ruwan sanyaya mai gudana, ƙyalli mai tace carbon da aka kunna, ƙurar tacewa ta membrane, da sauransu musamman ma a cikin kula da birni. najasa ko najasa masana'antu.
Ko kimanta sludge mai kunnawa da duk tsarin jiyya na halitta, nazarin ruwan datti da aka fitar bayan jiyya na tsarkakewa, ko gano yawan sludge a matakai daban-daban, mitar tattara sludge na iya ba da ci gaba da ingantaccen sakamakon auna.
Kayayyakin Kaya
85 ~ 265VAC ± 10%, 50± 1Hz, amfani da wutar lantarki ≤3W;
9 ~ 36VDC, amfani da wutar lantarki: ≤3W;
Aunawa Range
Turbidity: 0 ~ 9999NTU
Mitar Turbidity Kan layi T6570
Yanayin aunawa
Yanayin daidaitawa
Tsarin Trend
Yanayin saiti
Siffofin
1.Babban nuni, daidaitaccen sadarwa na 485, tare da ƙararrawa kan layi da layi, 235 * 185 * 120mm girman mita, 7.0 inch babban nunin allo.
2.An shigar da aikin rikodi na lankwasa bayanai, injin yana maye gurbin karatun mita na hannu, kuma an ƙayyade kewayon tambaya ba da gangan ba, don kada bayanan ya ɓace.
3.Real-lokaci rikodi na kan layi na MLSS / SS, bayanan zafin jiki da masu lankwasa, masu dacewa da duk matakan ruwa na kamfaninmu.
4.0-20NTU, 0-400NTU, 0-4000NTU, nau'ikan ma'auni iri-iri suna samuwa, dacewa da yanayin aiki daban-daban, daidaiton ma'auni ya kasance ƙasa da ± 5% na ƙimar da aka auna.
5.The sabon shaƙe inductance na ikon hukumar iya yadda ya kamata rage tasiri electromagnetic tsangwama, da kuma bayanai ne mafi barga.
6.Tsarin na'ura duka yana da ruwa da ƙura, kuma an ƙara murfin baya na tashar haɗin gwiwa don tsawaita rayuwar sabis a cikin yanayi mai tsanani.
7.Panel / bango / shigarwa na bututu, zaɓuɓɓuka uku suna samuwa don saduwa da bukatun shigarwa na masana'antu daban-daban.
Haɗin lantarki
Haɗin wutar lantarki Haɗin da ke tsakanin kayan aiki da firikwensin: samar da wutar lantarki, siginar fitarwa, lambar ƙararrawa relay da haɗi tsakanin firikwensin da na'urar duk suna cikin na'urar. Tsawon wayar gubar don kafaffen lantarki yawanci mita 5-10 ne, kuma lakabin da ya dace ko launi akan firikwensin Saka wayar a cikin madaidaicin tasha a cikin kayan aikin kuma ƙara ta.
Hanyar shigar kayan aiki
Bayanan fasaha
| Kewayon aunawa | 0-9999NTU |
| Ƙungiyar aunawa | NTU, mg/L |
| Ƙaddamarwa | 0.001; 0.01; 0.1; 1 |
| Kuskure na asali | ± 1% FS |
| Zazzabi | -10 ~ 150 ℃ |
| Ƙimar Zazzabi | 0.1 ℃ |
| Kuskuren asali na zafin jiki | ± 0.3 ℃ |
| Abubuwan da aka fitar na yanzu | Biyu 4 ~ 20mA, 20 ~ 4mA, 0 ~ 20mA |
| Fitowar sigina | RS485 MODBUS RTU |
| Sauran ayyuka | Rikodin bayanai & nunin Lanƙwasa |
| Lambobin sarrafawa na relay | 3 Rukuni: 5A 250VAC,5A 30VDC |
| Wutar wutar lantarki na zaɓi | 85 ~ 265VAC, 9 ~ 36VDC, amfani da wutar lantarki≤3W |
| Yanayin aiki | Babu wani tsangwama mai ƙarfi bayan ƙasa |
| Yanayin aiki | -10 ~ 60 ℃ |
| Dangi zafi | ≤90% |
| Ƙididdiga mai hana ruwa | IP65 |
| Nauyi | 1.5 kg |
| Girma | 235×185×120mm |
| Shigarwa | An saka bango |
