Kan layi Dakatar da Ƙarfafa Mita T6075
Tya ka'ida na sludge maida hankali firikwensin dogara ne a kan
haɗin infrared absorption da tarwatsa hanyar haske. Ana iya amfani da hanyar ISO7027 don ci gaba da ƙayyadadden ƙayyadaddun ƙwayar sludge.
A cewar ISO7027 infrared sau biyu-watsawafasahar haske ba ta da tasiri ta chromaticity don ƙayyade ƙimar tattara sludge. Ana iya zaɓar aikin tsaftace kai bisa ga yanayin amfani. Bayanan tsayayye, aiki mai dogara; ginanniyar aikin tantance kai don tabbatar da ingantaccen bayanai; sauki shigarwa da calibration.
Yawan Amfani
Mitar daskararrun da aka dakatar akan layi kayan aikin bincike ne akan layitsara don auna sludge taro na ruwa daga waterworks, birni bututu cibiyar sadarwa, masana'antu tsari ruwa ingancin saka idanu, zagawa sanyaya ruwa, kunna carbon tace effluent, membrane tace zubar da ruwa, da dai sauransu musamman a lura da najasa na birni ko masana'antu sharar gida ruwa. Ko kimanta sludge mai kunnawa da duk tsarin jiyya na halitta, nazarin ruwan datti da aka fitar bayan jiyya na tsarkakewa, ko gano yawan sludge a matakai daban-daban, mitar tattara sludge na iya ba da ci gaba da ingantaccen sakamakon auna.
Kayayyakin Kaya
85 ~ 265VAC ± 10%, 50± 1Hz, amfani da wutar lantarki ≤3W;
9 ~ 36VDC, amfani da wutar lantarki: ≤3W;
Aunawa Range
Dakatar da ƙarfi (ƙarfin sludge): 0 ~ 99999mg/L
Mitar Turbidity Kan layi T6075
Yanayin aunawa
Yanayin daidaitawa
Tsarin Trend
Yanayin saiti
Siffofin
1.Babban nuni, daidaitaccen sadarwar 485, tare da ƙararrawa kan layi da layi, 144 * 144 * 118mm girman mita, 138 * 138 girman rami, 4.3 inch babban nunin allo.
2.An shigar da aikin rikodi na lankwasa bayanai, injin yana maye gurbin karatun mita na hannu, kuma an ƙayyade kewayon tambaya ba da gangan ba, don kada bayanan ya ɓace.
3.Real-lokaci rikodi na kan layi na MLSS / SS, bayanan zafin jiki da masu lankwasa, masu dacewa da duk matakan ruwa na kamfaninmu.
4.0-500mg / L, 0-5000mg / L, 0-100g / L, ana samun nau'ikan ma'auni iri-iri, dacewa da yanayin aiki daban-daban, daidaiton ma'auni ya kasa ± 5% na ƙimar da aka auna.
5.The sabon shaƙe inductance na ikon hukumar iya yadda ya kamata rage tasiri electromagnetic tsangwama, da kuma bayanai ne mafi barga.
6.Tsarin na'ura duka yana da ruwa da ƙura, kuma an ƙara murfin baya na tashar haɗin gwiwa don tsawaita rayuwar sabis a cikin yanayi mai tsanani.
7.Panel / bango / shigarwa na bututu, zaɓuɓɓuka uku suna samuwa don saduwa da bukatun shigarwa na masana'antu daban-daban.
Haɗin lantarki
Haɗin wutar lantarki Haɗin da ke tsakanin kayan aiki da firikwensin: samar da wutar lantarki, siginar fitarwa, lambar ƙararrawa relay da haɗi tsakanin firikwensin da na'urar duk suna cikin na'urar. Tsawon wayar gubar don kafaffen lantarki yawanci mita 5-10 ne, kuma lakabin da ya dace ko launi akan firikwensin Saka wayar a cikin madaidaicin tasha a cikin kayan aikin kuma ƙara ta.
Hanyar shigar kayan aiki
Bayanan fasaha
| Kewayon aunawa | 0 ~ 500 ~ 5000mg/L; 0 ~ 50 ~ 100g/L (Za'a iya tsawaita) |
| Ƙungiyar aunawa | mg/l;g/l |
| Ƙaddamarwa | 0.001mg/L;0.1g/L |
| Kuskure na asali | ± 1% FS ˫ |
| Zazzabi | 0 ~ 50 ˫ |
| Ƙimar Zazzabi | 0.1 ˫ |
| Kuskuren asali na zafin jiki | ± 0.3 |
| Abubuwan da aka fitar na yanzu | Biyu 4 ~ 20mA, 20 ~ 4mA, 0 ~ 20mA |
| Fitowar sigina | RS485 MODBUS RTU |
| Sauran ayyuka | Rikodin bayanai & nunin Lanƙwasa |
| Lambobin sarrafawa na relay guda uku | 5A 250VAC, 5A 30VDC |
| Wutar wutar lantarki na zaɓi | 85 ~ 265VAC, 9 ~ 36VDC, amfani da wutar lantarki≤3W |
| Yanayin aiki | Babu wani tsangwama mai ƙarfi a kusa da filin maganadisu sai filin geomagnetic. ˫ |
| Yanayin aiki | -10-60 |
| Dangi zafi | ≤90% |
| Ƙididdiga mai hana ruwa | IP65 |
| Nauyi | 0.8kg |
| Girma | 144×144×118mm |
| Girman buɗewa shigarwa | 138×138mm |
| Hanyoyin shigarwa | Panel & bango mounted ko bututu |
