Ma'aunin Daskararru na Kan layi T4075
Ka'idar firikwensin tattarawar sludgeya dogara ne akan hanyar haɗakar shaƙar infrared da kuma hanyar hasken da aka watsar. Ana iya amfani da hanyar ISO7027 don ci gaba da tantance yawan laka daidai.
A cewar ISO7027, fasahar hasken infrared mai watsawa sau biyu ba ta shafar chromaticity don tantance ƙimar yawan laka. Ana iya zaɓar aikin tsaftace kai bisa ga yanayin amfani. Bayanan da suka dace, aiki mai inganci; aikin ganewar kai da aka gina a ciki don tabbatar da daidaiton bayanai; shigarwa da daidaitawa mai sauƙi.
Amfani na yau da kullun
Mita mai ƙarfi ta yanar gizo da aka dakatar kayan aiki ne na nazari ta yanar gizoAn tsara shi don auna yawan laka da ruwa ke fitarwa daga ayyukan ruwa, hanyar sadarwa ta bututun ruwa na birni, sa ido kan ingancin ruwa a tsarin masana'antu, ruwan sanyaya da ke yawo, fitar da iskar carbon, fitar da ruwa daga membrane, da sauransu. Musamman a fannin kula da najasa na birni ko ruwan sharar masana'antu. Ko dai ana tantance laka da aka kunna da kuma dukkan tsarin maganin halittu, ko kuma ana nazarin ruwan sharar da aka fitar bayan an yi maganin tsarkakewa, ko kuma ana gano yawan laka a matakai daban-daban, na'urar auna laka za ta iya samar da sakamako mai ci gaba da daidaito.
Kayayyakin Mains
85~265VAC±10%, 50±1Hz, amfani da wutar lantarki≤3W9~36VDC， Amfani da wutar lantarki：≤3W
Nisan Aunawa
Daskararrun da aka dakatar (yawan laka): 0~99999mg/L
Ma'aunin Daskararru na Kan layi T4075
Yanayin Aunawa
Yanayin daidaitawa
Yanayin Saiti
Siffofi
1. Babban nuni, sadarwa ta 485 ta yau da kullun, tare da ƙararrawa ta kan layi da ta layi, girman mita 98 * 98 * 130mm, girman rami 92.5 * 92.5mm, babban allon nuni mai inci 3.0.
2. Rikodin MLSS/SS na kan layi na ainihin lokaci, bayanan zafin jiki da lanƙwasa, masu dacewa da duk ma'aunin ingancin ruwa na kamfaninmu.
3.0-500mg/L, 0-5000mg/L, 0-100g/L, akwai nau'ikan ma'auni iri-iri, sun dace da yanayi daban-daban na aiki, daidaiton ma'auni bai wuce ±5% na ƙimar da aka auna ba.
4. Sabuwar hanyar shakewa ta allon wutar lantarki na iya rage tasirin tsangwama na lantarki yadda ya kamata, kuma bayanan sun fi karko.
5.Tsarin injin gaba ɗaya ba shi da ruwa kuma ba ya ƙura, kuma murfin bayaan ƙara tashar haɗin don tsawaita rayuwar sabis a cikin mawuyacin yanayi.
6. Shigar da bangarori/bango/bututu, akwai zaɓuɓɓuka guda uku don biyan buƙatun shigarwa na masana'antu daban-daban.
Haɗin lantarki
Haɗin lantarki Haɗin da ke tsakanin kayan aiki da firikwensin: samar da wutar lantarki, siginar fitarwa, hulɗar ƙararrawa ta relay da haɗin da ke tsakanin firikwensin da kayan aiki duk suna cikin kayan aikin. Tsawon wayar jagora don na'urar lantarki mai tsayayye yawanci mita 5-10 ne, kuma lakabin ko launi da ya dace akan firikwensin Saka wayar a cikin tashar da ta dace a cikin kayan aikin kuma ƙara ta.
Hanyar shigar da kayan aiki
Bayanan fasaha
| Kewayon aunawa | 0~500~5000mg/L;0~50~100g/L(Ana iya tsawaita shi) |
| Na'urar aunawa | mg/L; g/L |
| ƙuduri | 0.001mg/L;0.1g/L |
| Kuskuren asali | ±1%FS ˫ |
| Zafin jiki | 0~50 ˫ |
| Yankewar Zafin Jiki | 0.1 ˫ |
| Zafin Jiki Kuskuren asali | ±0.3 |
| Fitowar yanzu | Biyu 4 ~ 20mA, 20 ~ 4mA, 0 ~ 20mA |
| Fitar da sigina | RS485 MODBUS RTU |
| Sauran ayyuka | Bayanan bayanai |
| Lambobin sadarwa guda uku na sarrafa jigilar kaya | 5A 250VAC,5A 30VDC |
| Tsarin samar da wutar lantarki na zaɓi | 85~265VAC,9~36VDC, amfani da wutar lantarki≤3W |
| Yanayin aiki | Babu wani tsangwama mai ƙarfi a kusa da filin maganadisu sai dai filin geomagnetic. ˫ |
| Zafin aiki | -10~60 |
| Danshin da ya dace | ≤90% |
| Matsayin hana ruwa shiga | IP65 |
| Nauyi | 0.6kg |
| Girma | 98 × 98 × 130mm |
| Girman buɗewar shigarwa | 92.5×92.5mm |
| Hanyoyin shigarwa | An saka panel & bango ko bututun mai |
